No Limit R/C Official Rule Book Version 5.0 August, 2010
Mission Statement - No Limit R/C's purpose is to promote fun, competitive R/C racing and pulling events in a wholesome family atmosphere.
General Event Guidelines
1. We must all remember that we not only represent No Limit R/C, but also the various hobby stores and businesses that host and sponsor the events. Therefore, senior participants of the hobby are expected to set good examples to assist the newer participants of the hobby.
2. All decisions made by the No Limit R/C Track Official will stand. Staff and participants are required to maintain self-control and good sportsmanship at all times. The use of foul language, stealing, fighting or arguing with No Limit R/C Track officials and other participants is prohibited.
3. The presence or uses of any alcoholic beverages or illegal drugs at any of our events are not permitted. Operation of nitro R/C vehicles while under the influence is dangerous. In the event that a participant is suspected to have consumed any alcoholic beverages or illegal drugs, he/she will be bared from further participation and will be dismissed from the event. Such participants will forfeit their entry fee and accumulated points. The appropriate Law Enforcement authorities will be called to assist any participants that refuse to leave the events when asked to do so under the listed circumstances.
Grievance Reporting: Any participant may file a grievance if a rules violation is suspected.
1. Participants must submit a written statement with explanation of grievance to a No Limit R/C Official along with a $20 non-refundable fee.
2. All grievances must be reported by the end of the event in question. NO EXCEPTIONS.
3. The vehicle owner in which the grievance has been reported against will be advised by a No Limit R/C Official that impoundment and inspection of the vehicle will be required. If disassembly is required, the owner will be requested to do so under the direction of the Official.
4. Race results will be reviewed by the No Limit R/C Track Officials. All decisions are FINAL.
5. Participants are not allowed to enter the same truck under two different drivers. No Truck sharing will be permitted. No switching bodies onto different chassis or vise-versa will not be permitted or tolerated. Competitors caught doing this will be disqualified from the entire event.
Show and Shine
All trucks entered into the world finals are eligible to compete in the show and shine. The trucks will be judged in the following categories:
- Best scale representation of a full size monster truck.
- King of Bling/ chrome galore
- Best paint and graphics
- Best looking chassis/design
- Best of show
- Presidents award
- Dennis Anderson's off the Hook Award
-Shelf queen
4X4 Nitro Small Block Monster Truck
1. Engine - Any readily available production nitro engine with a displacement no smaller then .12 cubic inches and no larger then .20 cubic inches.
2. Truck – Small Block HPI Savage , Traxxas Revo, T-Maxx, AE 3.0 are examples of trucks that can run in this class. No Truggies.
3. Tires - Tires are to be any readily available production tire with dimensions no smaller than 5" high x 2.5" wide. Tires may be changed during competition as long as they meet the size requirements. Buggy tires are prohibited.
4. Transmission - Each truck shall be equipped with a functional gear driven transmission to propel the truck. Direct drive truggy gearing is prohibited. Center Differentials and one way bearings are NOT permitted.
5. Weight - Small block pulling trucks shall weigh no more than 15 pounds. This rule only applies for pulling there are no weight requirements for racing. SportsMan Small block Pulling Trucks may weigh no more than 13 pounds.
6. Chassis - Chassis is to be any readily available production or custom Monster Truck type chassis. Flat Buggy and Truggy type chassis are prohibited.
4X4 Sportsman Nitro Small Block Pulling Monster Truck
This class was derived to provide participants with non-purpose built pulling trucks an opportunity to compete in a class of their own. This Class is not for full blown custom built pulling trucks, but more for participants that can race with there truck, and want to try there hand at sled pulling. All trucks will be inspected and weighed and any trucks that are in violation of the rules can still compete in the main pulling competition.
1. Trucks must follow rules 1 through 5 of the Small Block Monster truck class as well as additional rules listed below.
2. Wheel base must be stock for that particular kit. No extended wheelbases or extended custom chassis will be permitted.
3. You may add weight to the truck to meet the 13 pound weight limit, however the weights may not be extended past the stock location of the front bumper. Custom extended weight boxes will not be allowed.
4. No custom hitches, high strength zip ties will be issued at the event.
4X4 Nitro Big Block Monster Truck & Pro/Factory 4X4 Nitro Big Block Monster Truck
1. Engine - Any readily available production nitro engine with a displacement .21 cubic inches and larger.
2. Truck - HPI Savage, Savage X, Savage XL, Losi LST1, LST2, LST XXL Aftershock, Beetle, Raminator, AE MGT are examples of trucks that can run in this class. Traxxas Revos and T-maxx's are permitted as long as they meet the motor and tire size requirements. No Truggies.
3. Tires - Tires are to be any readily available production tire with dimensions no smaller than 5" high x 3" wide. Tires may be changed during competition as long as they meet the size requirements. Buggy tires are prohibited.
4. Transmission - Each truck shall be equipped with a functional gear driven transmission to propel the truck. Truggy type Direct drive gearing is prohibited. Center Differentials, smart diffs and one way bearings are NOT permitted.
5. Weight - 4x4 Big Block pulling trucks shall weigh no more than 20 pounds. Unlimited 4x4 Big Block pulling trucks shall weigh 20.1 lbs and up. Big Block Sportsman Trucks can weigh up to 15 pounds. This rule only applies for pulling there are no weight requirements for racing.
6. Chassis - Chassis is to be any readily available production or custom Monster Truck type chassis.
7. If you are a past podium finisher 1st thru 3rd in any Racing class or you are a Pro Staff Factory driver for an RC Company you must register in the 4x4 Pro/Factory Class. This excludes the novice class.
8. 4x4 Unlimited Big Block Pulling trucks may be equipped with more than 1 big block motor, powere adders such as nitrous and super charger, ect... They must be 4 wheel drive.
4X4 Sportsman Nitro Big Block Pulling Monster Truck
This class was derived to provide participants with non-purpose built pulling trucks an opportunity to compete in a class of their own. This Class is not for full blown custom built pulling trucks, but more for participants that can race with there truck, and want to try there hand at sled pulling. All trucks will be inspected and weighed and any trucks that are in violation of the rules can still compete in the main pulling competition.
1. Trucks must follow rules 1 through 5 of the Big Block Monster truck class as well as additional rules listed below.
2. Wheel base must be stock for that particular kit. No extended wheelbases or extended custom chassis will be permitted.
3. You may add weight to the truck to meet the 15 pound weight limit, however the weights may not be extended past the stock location of the front bumper. Custom extended weight boxes will not be allowed.
4. No custom hitches, high strength zip ties will be issued at the event.
4X4 Brushless Electric Monster Truck
1. Truck - HPI Savage Flux, HPI E-Savage, Traxxas E-Maxx, E- Revo, Summit, Hot Bodies E-Zilla, and Kyosho Twin Force are examples of trucks that are permitted to run in this class. Custom built 4wd Electric Monster Trucks with independent or ladder bar type suspension similar to the production trucks stated above may run in this class also. Truck must run with a body. No Truggies.
2. Tires - Tires are to be any readily available production tire with dimensions no smaller than 5" high x 2.5" wide. Tires may be changed during competition as long as they meet the size requirements. Buggy tires are prohibited.
3. Transmission - Each truck shall be equipped with a functional gear driven transmission to propel the truck. Direct drive truggy gearing is prohibited. Center Differentials and smart diffs are not permitted. One way bearings are permitted.
4. Chassis - Chassis is to be any readily available production or custom Monster Truck type chassis.
5. Motors & Batteries - Trucks must run 1 or 2 brushless motors. Trucks may use a maximum of 14 Sub C and C size NiCd or NiMH cells or up to two 3 cell LI-Ion or LiPo battery packs.
4X4 Pro Modified Electric Monster Truck
1. Truck - Tamiya Clod Buster, Tamiya Super Clod Buster, Tamiya TXT-1, Tamiya Juggernaut 1 & 2, G - Made Dragoon are examples of trucks that are permitted to run in this class. Custom built 4wd electric monster trucks with solid axels and 4 link type suspensions are also permitted. Independent suspension is prohibited. Truck must run with a body.
2. Wheels & Tires - Wheels are to be Clod Buster size wheels 2.6" in diameter. Tires are to be any readily available production tire with dimensions no smaller than 5" high x 3 " wide. Tires may be changed during competition as long as they meet the size requirements. Buggy, Truggy, 40 series, Savage, MGT, T- Maxx size tires and wheels and tires are prohibited.
3. Transmission - Each truck shall be equipped with a functional gear driven transmission to propel the truck. Direct drive gearing is prohibited. Center Differentials, smart diffs and one way bearings are NOT permitted.
4. Chassis - Chassis is to be any readily available production or custom 4- link suspension based Monster Truck type chassis. Tube chassis and and vertical plate type chassis are permitted.
5. Motors & Batteries - Trucks must run 2 brushed 540 can motors or 2 brushless motors. Trucks may use a maximum of 14 Sub C and C size NiCd or NiMH cells or up to a 3 cell LI-Ion or LiPo battery.
4X4 Brushed Electric Monster Truck
1. Truck - HPI E-Savage, Traxxas E-Maxx, Hot Bodies E-Zilla, Red Cat Ground Pounder, and Kyosho Twin Force are examples of trucks that are permitted to run in this class. Custom built 4wd Electric Monster Trucks with independent or ladder bar type suspension similar to the production trucks stated above may run in this class also. Truck must run with a body. No Truggies.
2. Tires - Tires are to be any readily available production tire with dimensions no smaller than 5" high x 2.5" wide. Tires may be changed during competition as long as they meet the size requirements. Buggy tires are prohibited.
3. Transmission - Each truck shall be equipped with a functional gear driven transmission to propel the truck. Direct drive truggy gearing is prohibited. Center Differentials and smart diffs are not permitted. One way bearings are permitted.
4. Chassis - Chassis is to be any readily available production or custom Monster Truck type chassis. Supporting independent or ladder bar type suspension.
5. Motors & Batteries - Trucks must run 2 brushed motors with 540 or 550 cans .Trucks may use a maximum of 14 Sub C and C size NiCd or NiMH cells or up to two 3 cell LI-Ion or LiPo battery packs.
Children's Novice Electric Monster Truck
1. Truck - Truck may be any 4x4 or 2x4 Electric Monster Truck with a brushed motor No Nitro Powered Vehicles are permitted.
2. Age - Participants may be no older than 12 years old to compete in this class. This is a beginner's class to introduce new competitors into RC Monster Truck Racing.
3. Sportsmanship - This class is set up to be a fun class for the children and is a good way to teach children good racer etiquette and Sportsmanship.
4. If a Novice Competitor Won the previous year They will be required to Move up and race in the normal class that their vehicle falls under for the following year. Congrats your no longer a Novice!!
HPI Wheely King Pro Stock
1. Must run Wheely King transmission housing and gears, directly factory replacement housings and gears are allowed
2. Must run a stock Wheely king chassis HPI part number HPI #85254 or HPI part #85266
3. Must Run Wheely King Axel housings only, Center Differentials, smart diffs and one way bearings are NOT permitted.
4. Must Run battery in stock location in the rear of the chassis, however you may flip the chassis around if you wish to make the battery sit in the front.
5. Must run 1 brushed or Brushless motor
6. Must run no more than 6 cell Nicd or Nimh battery or up to one 2s lipo.
7. Wheel Base is not to exceed 12.5" when fully compressed.
8. Suspension can be of original wheel king 3 link design or 4 link design front and rear.
9. Sway bars are allowed
10. Trucks may be 2wd or 4wd
11. Wheel widener hubs are allowed
12. 2.2” After Market Wheels are allowed, but you MUST use the Stock HPI Wheely King Tire.
2wd Short Course Tuff Truck
1. Trucks Must be considered a 2wd Short course truck to enter this class. Examples of vehicles permitted to race in this class are: HPI Racing Blitz, Traxxas Slash, Team Associated SC10, Losi Strike, and the Thunder Tech Pro-2 Short Course Pro-2wd Racer. If the truck is not 1 of these vehicles, it will not be allowed to run in this class. Converting any other vehicles is not permitted.
2. The Body on the truck must remain a short course style truck body that covers the tires. Cutting the fenders off will not be allowed. Aftermarket bodies are permitted as long as they are considered “Short Course” style replacements.
3. Tires and wheels MUST remain short course style sizes listed below. NO BUGGY TIRES!
Wheel Inner Bead Max Diameter……………………….. 3.0 in / 76.20mm
Wheel Outer Bead Max Diameter………………………. 2.2 in / 55.88mm
Wheel Bead Width Max………………………………… 1.55 in / 39.37mm
Wheel Width Max………………………………………. 1.65 in / 41.91mm
Tire Maximum Width…(mounted)...…………………… 1.85 in / 46.99mm
Tire Diameter Min…(mounted)...………………………. 4.20 in / 106.68mm
4. Chassis - Chassis is to be any readily available production Short Course chassis resulting in the following specs.
5. Radios-Upgrading to 2.4 ghz or equivalent is permissible.
Wheelbase Min/Max……………………………………. 320mm / 335mm (12.59in / 13.19in)
Overall Length Min/Max……………………………….. 540mm / 568mm (21.25in / 22.36in)
Overall Width Min/Max………………………………… 290mm / 296mm (11.42in / 11.65in)
Minimum Weight……………………………………….. 74oz / 2098grams
2 Wheel Rear Drive……………………………………... Geared or Ball Differential
Rear Suspension………………………………………… Independent or Solid Axle
6. Motors & Batteries - Trucks may only use 1 brushed or brushless motors with 540 or 550 cans Trucks may use a maximum of 6 C and C size NiCd or NiMH cells or up to a 2 cell LI-Ion or LiPo battery.
Qualifying and Elimination Bracket Racing Guidelines
1. In order to form a class, the minimum number of trucks must be 6 total.
2. Transmitters must remain off in the pits unless that participant is racing.
3. The race course and event format will be discussed in the drivers meeting. Each participant is required to be present during the drivers meeting. Any and all questions can be addressed during this time regarding the events and scoring.
4. Once a participant has "staged" his/her truck at the starting line you have one minute to stage.
5. A one minute grace period will be allotted only if the participant encounters a problem at the starting line. Each participant will be allowed to receive only 1, one-minute grace period per run.
6. If the truck moves across the staging plane before the green light is illuminated, then red light will illuminate, indicating a false start.
7. Trucks are required to come in contact with the obstacle (e.g. crush car ramps or ramp) with any combination of two tires. If only one tire of either side of the truck contacts the obstacle, a 2 second penalty, for each occurrence, will be added to the participant's final time.
8. The truck may not hit or come in contact with any part of the timing system or its barricades during the run, if this happened it will result in a disqualification.
9. When trucks are competing and one or both completes an illegal run, the first truck in violation will be disqualified. In the event that a time is unable to be recorded due to the violation, the remaining participant will be assessed the slowest time of the day.
10. In the event that any portion of a participating truck goes out of bounds, or drives into the other competitor's lane, it will result in a disqualification of the truck in violation.
11. In the event that a competitor with multiple entries in the same class should happen to race him/herself, each truck will run 1 at a time on the track in different lanes. Whichever truck records the fastest elapse time will advance into the next round.
12. In the event that 1 truck red lights and his competitor cannot make it around the track for a legal run then the fastest loser with a legal run from that bracket will be brought back to advance to the next round. If a winning competitor cannot make it back for the FINAL Round of racing, the competitor He or she beat will be inserted back into the bracket.
13. If a truck records a disqualified qualifying run, they will still be seated in the elimination bracket after the slowest time. If there are multiple disqualified trucks in a qualifying round then each disqualified truck will be seated based on their running order.
14. Participants are not allowed to enter the same truck under two different drivers. No Truck sharing will be permitted.
Truck Pulling Guidelines
1. All participating trucks are required to be weighed immediately following the conclusion of the pull. If the vehicle is found to be over the required weight limit that truck will be disqualified from that round of the pulling competition.
2. Each participating truck will be hooked to the sled with the chain pulled tight. When the truck is no longer able to gain forward drive, a No Limit R/C Track Official will signal you to stop, thus ending your pull. The distance from the front of the pulling sleds skid plate will then be measured.
3. The Pulling track is 4' x 30'. In the event a participating truck goes out of bounds, the distance will be measured at the area of the pull sled which crosses the out of bounds marker.
4. There will be 2 rounds of pulling before the competition moves forward onto the pull off. If a competitor records a full pull in round 1, they are not required to pull in round 2.
5. This gives each competitor 2 chances to record a full pull which will earn them a spot in the pull off. A "pull off" will result if two or more trucks record a full pull. For the "pull off" extra weight will be added to the sled until a winner can be determined. There will be only 1 round in the pull off.
6. If a participating truck disregards a No Limit R/C Track Official's signal to cease pull, which results in an over pull, the truck will be disqualified.
7. If the pulling surface is carpet each truck is required to have the exhaust defected away from saturating the carpet pulling surface with oil and smoke, This can be done be re-indexing the exhaust pipe or by using a exhaust defector.
8. 4x4 Small Block Pulling trucks can weigh no more than 15 pounds.
9. 4x4 Sportsman Small Block Pulling trucks can weigh no more than 13 pounds.
10. 4x4 Big Block Pulling Trucks can weight no more than 20 pounds.
11. 4x4 Sportsman Big Block Pulling Trucks can weight no more than 15 pounds.
12. 4x4 Unlimited Big Block Pulling Trucks must weigh 20.1 pounds and above.
13. 4x4 Nitro Small block, 4x4 Sportsman Classes and 4x4 nitro Big block classes no power additives and only nitro burning single engine set ups. Small block, big block and unlimited 4x4 nitro classes will compete for prizes on dirt. All 2X4 set ups, all gasoline set ups and all electric set ups will compete in the exhibition pulling class and may compete on dirt or carpet if time permits.
14. Each participating Pulling Truck except of Sportsman classes must have an affixed hitch for hooking to the sled. This hitch may be aluminum or steel. No plastic Zip ties will be allowed.
Mission Statement - No Limit R/C's purpose is to promote fun, competitive R/C racing and pulling events in a wholesome family atmosphere.
General Event Guidelines
1. We must all remember that we not only represent No Limit R/C, but also the various hobby stores and businesses that host and sponsor the events. Therefore, senior participants of the hobby are expected to set good examples to assist the newer participants of the hobby.
2. All decisions made by the No Limit R/C Track Official will stand. Staff and participants are required to maintain self-control and good sportsmanship at all times. The use of foul language, stealing, fighting or arguing with No Limit R/C Track officials and other participants is prohibited.
3. The presence or uses of any alcoholic beverages or illegal drugs at any of our events are not permitted. Operation of nitro R/C vehicles while under the influence is dangerous. In the event that a participant is suspected to have consumed any alcoholic beverages or illegal drugs, he/she will be bared from further participation and will be dismissed from the event. Such participants will forfeit their entry fee and accumulated points. The appropriate Law Enforcement authorities will be called to assist any participants that refuse to leave the events when asked to do so under the listed circumstances.
Grievance Reporting: Any participant may file a grievance if a rules violation is suspected.
1. Participants must submit a written statement with explanation of grievance to a No Limit R/C Official along with a $20 non-refundable fee.
2. All grievances must be reported by the end of the event in question. NO EXCEPTIONS.
3. The vehicle owner in which the grievance has been reported against will be advised by a No Limit R/C Official that impoundment and inspection of the vehicle will be required. If disassembly is required, the owner will be requested to do so under the direction of the Official.
4. Race results will be reviewed by the No Limit R/C Track Officials. All decisions are FINAL.
5. Participants are not allowed to enter the same truck under two different drivers. No Truck sharing will be permitted. No switching bodies onto different chassis or vise-versa will not be permitted or tolerated. Competitors caught doing this will be disqualified from the entire event.
Show and Shine
All trucks entered into the world finals are eligible to compete in the show and shine. The trucks will be judged in the following categories:
- Best scale representation of a full size monster truck.
- King of Bling/ chrome galore
- Best paint and graphics
- Best looking chassis/design
- Best of show
- Presidents award
- Dennis Anderson's off the Hook Award
-Shelf queen
4X4 Nitro Small Block Monster Truck
1. Engine - Any readily available production nitro engine with a displacement no smaller then .12 cubic inches and no larger then .20 cubic inches.
2. Truck – Small Block HPI Savage , Traxxas Revo, T-Maxx, AE 3.0 are examples of trucks that can run in this class. No Truggies.
3. Tires - Tires are to be any readily available production tire with dimensions no smaller than 5" high x 2.5" wide. Tires may be changed during competition as long as they meet the size requirements. Buggy tires are prohibited.
4. Transmission - Each truck shall be equipped with a functional gear driven transmission to propel the truck. Direct drive truggy gearing is prohibited. Center Differentials and one way bearings are NOT permitted.
5. Weight - Small block pulling trucks shall weigh no more than 15 pounds. This rule only applies for pulling there are no weight requirements for racing. SportsMan Small block Pulling Trucks may weigh no more than 13 pounds.
6. Chassis - Chassis is to be any readily available production or custom Monster Truck type chassis. Flat Buggy and Truggy type chassis are prohibited.
4X4 Sportsman Nitro Small Block Pulling Monster Truck
This class was derived to provide participants with non-purpose built pulling trucks an opportunity to compete in a class of their own. This Class is not for full blown custom built pulling trucks, but more for participants that can race with there truck, and want to try there hand at sled pulling. All trucks will be inspected and weighed and any trucks that are in violation of the rules can still compete in the main pulling competition.
1. Trucks must follow rules 1 through 5 of the Small Block Monster truck class as well as additional rules listed below.
2. Wheel base must be stock for that particular kit. No extended wheelbases or extended custom chassis will be permitted.
3. You may add weight to the truck to meet the 13 pound weight limit, however the weights may not be extended past the stock location of the front bumper. Custom extended weight boxes will not be allowed.
4. No custom hitches, high strength zip ties will be issued at the event.
4X4 Nitro Big Block Monster Truck & Pro/Factory 4X4 Nitro Big Block Monster Truck
1. Engine - Any readily available production nitro engine with a displacement .21 cubic inches and larger.
2. Truck - HPI Savage, Savage X, Savage XL, Losi LST1, LST2, LST XXL Aftershock, Beetle, Raminator, AE MGT are examples of trucks that can run in this class. Traxxas Revos and T-maxx's are permitted as long as they meet the motor and tire size requirements. No Truggies.
3. Tires - Tires are to be any readily available production tire with dimensions no smaller than 5" high x 3" wide. Tires may be changed during competition as long as they meet the size requirements. Buggy tires are prohibited.
4. Transmission - Each truck shall be equipped with a functional gear driven transmission to propel the truck. Truggy type Direct drive gearing is prohibited. Center Differentials, smart diffs and one way bearings are NOT permitted.
5. Weight - 4x4 Big Block pulling trucks shall weigh no more than 20 pounds. Unlimited 4x4 Big Block pulling trucks shall weigh 20.1 lbs and up. Big Block Sportsman Trucks can weigh up to 15 pounds. This rule only applies for pulling there are no weight requirements for racing.
6. Chassis - Chassis is to be any readily available production or custom Monster Truck type chassis.
7. If you are a past podium finisher 1st thru 3rd in any Racing class or you are a Pro Staff Factory driver for an RC Company you must register in the 4x4 Pro/Factory Class. This excludes the novice class.
8. 4x4 Unlimited Big Block Pulling trucks may be equipped with more than 1 big block motor, powere adders such as nitrous and super charger, ect... They must be 4 wheel drive.
4X4 Sportsman Nitro Big Block Pulling Monster Truck
This class was derived to provide participants with non-purpose built pulling trucks an opportunity to compete in a class of their own. This Class is not for full blown custom built pulling trucks, but more for participants that can race with there truck, and want to try there hand at sled pulling. All trucks will be inspected and weighed and any trucks that are in violation of the rules can still compete in the main pulling competition.
1. Trucks must follow rules 1 through 5 of the Big Block Monster truck class as well as additional rules listed below.
2. Wheel base must be stock for that particular kit. No extended wheelbases or extended custom chassis will be permitted.
3. You may add weight to the truck to meet the 15 pound weight limit, however the weights may not be extended past the stock location of the front bumper. Custom extended weight boxes will not be allowed.
4. No custom hitches, high strength zip ties will be issued at the event.
4X4 Brushless Electric Monster Truck
1. Truck - HPI Savage Flux, HPI E-Savage, Traxxas E-Maxx, E- Revo, Summit, Hot Bodies E-Zilla, and Kyosho Twin Force are examples of trucks that are permitted to run in this class. Custom built 4wd Electric Monster Trucks with independent or ladder bar type suspension similar to the production trucks stated above may run in this class also. Truck must run with a body. No Truggies.
2. Tires - Tires are to be any readily available production tire with dimensions no smaller than 5" high x 2.5" wide. Tires may be changed during competition as long as they meet the size requirements. Buggy tires are prohibited.
3. Transmission - Each truck shall be equipped with a functional gear driven transmission to propel the truck. Direct drive truggy gearing is prohibited. Center Differentials and smart diffs are not permitted. One way bearings are permitted.
4. Chassis - Chassis is to be any readily available production or custom Monster Truck type chassis.
5. Motors & Batteries - Trucks must run 1 or 2 brushless motors. Trucks may use a maximum of 14 Sub C and C size NiCd or NiMH cells or up to two 3 cell LI-Ion or LiPo battery packs.
4X4 Pro Modified Electric Monster Truck
1. Truck - Tamiya Clod Buster, Tamiya Super Clod Buster, Tamiya TXT-1, Tamiya Juggernaut 1 & 2, G - Made Dragoon are examples of trucks that are permitted to run in this class. Custom built 4wd electric monster trucks with solid axels and 4 link type suspensions are also permitted. Independent suspension is prohibited. Truck must run with a body.
2. Wheels & Tires - Wheels are to be Clod Buster size wheels 2.6" in diameter. Tires are to be any readily available production tire with dimensions no smaller than 5" high x 3 " wide. Tires may be changed during competition as long as they meet the size requirements. Buggy, Truggy, 40 series, Savage, MGT, T- Maxx size tires and wheels and tires are prohibited.
3. Transmission - Each truck shall be equipped with a functional gear driven transmission to propel the truck. Direct drive gearing is prohibited. Center Differentials, smart diffs and one way bearings are NOT permitted.
4. Chassis - Chassis is to be any readily available production or custom 4- link suspension based Monster Truck type chassis. Tube chassis and and vertical plate type chassis are permitted.
5. Motors & Batteries - Trucks must run 2 brushed 540 can motors or 2 brushless motors. Trucks may use a maximum of 14 Sub C and C size NiCd or NiMH cells or up to a 3 cell LI-Ion or LiPo battery.
4X4 Brushed Electric Monster Truck
1. Truck - HPI E-Savage, Traxxas E-Maxx, Hot Bodies E-Zilla, Red Cat Ground Pounder, and Kyosho Twin Force are examples of trucks that are permitted to run in this class. Custom built 4wd Electric Monster Trucks with independent or ladder bar type suspension similar to the production trucks stated above may run in this class also. Truck must run with a body. No Truggies.
2. Tires - Tires are to be any readily available production tire with dimensions no smaller than 5" high x 2.5" wide. Tires may be changed during competition as long as they meet the size requirements. Buggy tires are prohibited.
3. Transmission - Each truck shall be equipped with a functional gear driven transmission to propel the truck. Direct drive truggy gearing is prohibited. Center Differentials and smart diffs are not permitted. One way bearings are permitted.
4. Chassis - Chassis is to be any readily available production or custom Monster Truck type chassis. Supporting independent or ladder bar type suspension.
5. Motors & Batteries - Trucks must run 2 brushed motors with 540 or 550 cans .Trucks may use a maximum of 14 Sub C and C size NiCd or NiMH cells or up to two 3 cell LI-Ion or LiPo battery packs.
Children's Novice Electric Monster Truck
1. Truck - Truck may be any 4x4 or 2x4 Electric Monster Truck with a brushed motor No Nitro Powered Vehicles are permitted.
2. Age - Participants may be no older than 12 years old to compete in this class. This is a beginner's class to introduce new competitors into RC Monster Truck Racing.
3. Sportsmanship - This class is set up to be a fun class for the children and is a good way to teach children good racer etiquette and Sportsmanship.
4. If a Novice Competitor Won the previous year They will be required to Move up and race in the normal class that their vehicle falls under for the following year. Congrats your no longer a Novice!!
HPI Wheely King Pro Stock
1. Must run Wheely King transmission housing and gears, directly factory replacement housings and gears are allowed
2. Must run a stock Wheely king chassis HPI part number HPI #85254 or HPI part #85266
3. Must Run Wheely King Axel housings only, Center Differentials, smart diffs and one way bearings are NOT permitted.
4. Must Run battery in stock location in the rear of the chassis, however you may flip the chassis around if you wish to make the battery sit in the front.
5. Must run 1 brushed or Brushless motor
6. Must run no more than 6 cell Nicd or Nimh battery or up to one 2s lipo.
7. Wheel Base is not to exceed 12.5" when fully compressed.
8. Suspension can be of original wheel king 3 link design or 4 link design front and rear.
9. Sway bars are allowed
10. Trucks may be 2wd or 4wd
11. Wheel widener hubs are allowed
12. 2.2” After Market Wheels are allowed, but you MUST use the Stock HPI Wheely King Tire.
2wd Short Course Tuff Truck
1. Trucks Must be considered a 2wd Short course truck to enter this class. Examples of vehicles permitted to race in this class are: HPI Racing Blitz, Traxxas Slash, Team Associated SC10, Losi Strike, and the Thunder Tech Pro-2 Short Course Pro-2wd Racer. If the truck is not 1 of these vehicles, it will not be allowed to run in this class. Converting any other vehicles is not permitted.
2. The Body on the truck must remain a short course style truck body that covers the tires. Cutting the fenders off will not be allowed. Aftermarket bodies are permitted as long as they are considered “Short Course” style replacements.
3. Tires and wheels MUST remain short course style sizes listed below. NO BUGGY TIRES!
Wheel Inner Bead Max Diameter……………………….. 3.0 in / 76.20mm
Wheel Outer Bead Max Diameter………………………. 2.2 in / 55.88mm
Wheel Bead Width Max………………………………… 1.55 in / 39.37mm
Wheel Width Max………………………………………. 1.65 in / 41.91mm
Tire Maximum Width…(mounted)...…………………… 1.85 in / 46.99mm
Tire Diameter Min…(mounted)...………………………. 4.20 in / 106.68mm
4. Chassis - Chassis is to be any readily available production Short Course chassis resulting in the following specs.
5. Radios-Upgrading to 2.4 ghz or equivalent is permissible.
Wheelbase Min/Max……………………………………. 320mm / 335mm (12.59in / 13.19in)
Overall Length Min/Max……………………………….. 540mm / 568mm (21.25in / 22.36in)
Overall Width Min/Max………………………………… 290mm / 296mm (11.42in / 11.65in)
Minimum Weight……………………………………….. 74oz / 2098grams
2 Wheel Rear Drive……………………………………... Geared or Ball Differential
Rear Suspension………………………………………… Independent or Solid Axle
6. Motors & Batteries - Trucks may only use 1 brushed or brushless motors with 540 or 550 cans Trucks may use a maximum of 6 C and C size NiCd or NiMH cells or up to a 2 cell LI-Ion or LiPo battery.
Qualifying and Elimination Bracket Racing Guidelines
1. In order to form a class, the minimum number of trucks must be 6 total.
2. Transmitters must remain off in the pits unless that participant is racing.
3. The race course and event format will be discussed in the drivers meeting. Each participant is required to be present during the drivers meeting. Any and all questions can be addressed during this time regarding the events and scoring.
4. Once a participant has "staged" his/her truck at the starting line you have one minute to stage.
5. A one minute grace period will be allotted only if the participant encounters a problem at the starting line. Each participant will be allowed to receive only 1, one-minute grace period per run.
6. If the truck moves across the staging plane before the green light is illuminated, then red light will illuminate, indicating a false start.
7. Trucks are required to come in contact with the obstacle (e.g. crush car ramps or ramp) with any combination of two tires. If only one tire of either side of the truck contacts the obstacle, a 2 second penalty, for each occurrence, will be added to the participant's final time.
8. The truck may not hit or come in contact with any part of the timing system or its barricades during the run, if this happened it will result in a disqualification.
9. When trucks are competing and one or both completes an illegal run, the first truck in violation will be disqualified. In the event that a time is unable to be recorded due to the violation, the remaining participant will be assessed the slowest time of the day.
10. In the event that any portion of a participating truck goes out of bounds, or drives into the other competitor's lane, it will result in a disqualification of the truck in violation.
11. In the event that a competitor with multiple entries in the same class should happen to race him/herself, each truck will run 1 at a time on the track in different lanes. Whichever truck records the fastest elapse time will advance into the next round.
12. In the event that 1 truck red lights and his competitor cannot make it around the track for a legal run then the fastest loser with a legal run from that bracket will be brought back to advance to the next round. If a winning competitor cannot make it back for the FINAL Round of racing, the competitor He or she beat will be inserted back into the bracket.
13. If a truck records a disqualified qualifying run, they will still be seated in the elimination bracket after the slowest time. If there are multiple disqualified trucks in a qualifying round then each disqualified truck will be seated based on their running order.
14. Participants are not allowed to enter the same truck under two different drivers. No Truck sharing will be permitted.
Truck Pulling Guidelines
1. All participating trucks are required to be weighed immediately following the conclusion of the pull. If the vehicle is found to be over the required weight limit that truck will be disqualified from that round of the pulling competition.
2. Each participating truck will be hooked to the sled with the chain pulled tight. When the truck is no longer able to gain forward drive, a No Limit R/C Track Official will signal you to stop, thus ending your pull. The distance from the front of the pulling sleds skid plate will then be measured.
3. The Pulling track is 4' x 30'. In the event a participating truck goes out of bounds, the distance will be measured at the area of the pull sled which crosses the out of bounds marker.
4. There will be 2 rounds of pulling before the competition moves forward onto the pull off. If a competitor records a full pull in round 1, they are not required to pull in round 2.
5. This gives each competitor 2 chances to record a full pull which will earn them a spot in the pull off. A "pull off" will result if two or more trucks record a full pull. For the "pull off" extra weight will be added to the sled until a winner can be determined. There will be only 1 round in the pull off.
6. If a participating truck disregards a No Limit R/C Track Official's signal to cease pull, which results in an over pull, the truck will be disqualified.
7. If the pulling surface is carpet each truck is required to have the exhaust defected away from saturating the carpet pulling surface with oil and smoke, This can be done be re-indexing the exhaust pipe or by using a exhaust defector.
8. 4x4 Small Block Pulling trucks can weigh no more than 15 pounds.
9. 4x4 Sportsman Small Block Pulling trucks can weigh no more than 13 pounds.
10. 4x4 Big Block Pulling Trucks can weight no more than 20 pounds.
11. 4x4 Sportsman Big Block Pulling Trucks can weight no more than 15 pounds.
12. 4x4 Unlimited Big Block Pulling Trucks must weigh 20.1 pounds and above.
13. 4x4 Nitro Small block, 4x4 Sportsman Classes and 4x4 nitro Big block classes no power additives and only nitro burning single engine set ups. Small block, big block and unlimited 4x4 nitro classes will compete for prizes on dirt. All 2X4 set ups, all gasoline set ups and all electric set ups will compete in the exhibition pulling class and may compete on dirt or carpet if time permits.
14. Each participating Pulling Truck except of Sportsman classes must have an affixed hitch for hooking to the sled. This hitch may be aluminum or steel. No plastic Zip ties will be allowed.
